Wifi doesn 39 t have a valid IP configuration

Wifi doesn't have a valid IP configuration

I understand that you are facing issues with wireless network.

We appreciate your effort to resolve the issue. I suggest you to perform the following troubleshooting steps also and check if it helps.

The issue could be caused if there is a miss match in the IP address configuration.

Method 1:

Release and renew IP address for your computer:

a. Press Windows key + X and select “command prompt (admin)”.
b. Type ipconfig /release and hit Enter.
c. Then type ipconfig /renew and hit Enter.
d. Type Exit and hit Enter.

Method 2:

Follow the steps to manually assign IP address:

a. Open Network Connections by pressing Windows + X keys on the keyboard and select Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, click View network connections.
b. Right-click the connection that you want to change, and then click Properties. If you’re prompted for an administrator password or confirmation, type the password or provide confirmation.
c. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
d. To specify IPv4 IP address settings, do one of the following:
• To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, andDefault gateway boxes, type the IP address settings.
e. To specify IPv6 IP address settings, do one of the following:
• To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
f. To specify DNS server address settings, do one of the following:
• To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
g. To change advanced DNS, WINS, and IP settings, click Advanced.

Method 3:

An automated troubleshooter is a tool that can find and automatically fix some problems with your computer. These troubleshooters aren’t designed to fix every problem, but they’re a useful tool to try because they can often save you time and effort.

Run the Network Troubleshooter from the link:

Wired and wireless network problems:

This should resolve the issue.

If you face any issues related to Windows feel free to contact us and we will be happy to help you.

Источник

LAN IP Address Configuration in Windows and Mac PC

LAN IP Configuration in Windows and Mac PC

Network TCP/IP configuration settings need to set up an internet connection. When we want to connect a computer in the network than need to configure network settings. Does not matter you are using Windows, Mac or Linux PC, to run the internet and intranet required IP address configuration. You need a static IP address configuration to access the WiFI router and other network equipment.

Windows, Mac and Linux operating systems usually configured with DHCP mode(automatic) configuration so while the network configured in DHCP mode no need to set up an IP address in the PC.

However, you can configure LAN IP settings as per need static or DHCP depend on the network requirement. Follow the steps to change the IP address in windows 7, Windows 8, Windows 10, and Mac PC as well.

LAN Static IP configuration in Windows 7, 8.1 and Windows 10

Suppose you want to access router default gateway IP 192.168.l.l from windows PC then you have to manually configure the 192.168.1.0 network series to PC LAN settings or Use the DHCP option. follow the steps below.

To configure static IP mode in Windows 7, Windows 8, and Windows 10 all are similar steps.

TO making Static IP address configuration in Windows Pc you need to know about IP address class to configuration proper IP series.

You need to make PC LAN network in the same series IP address you want to connect any device.

Read more about IP Address Class

Making Windows LAN network in Automatic and Static IP follow the steps.

Open Run using Windows Key+ R key (press both together)

Type the command “Ncpa.cpl” and click the OK button.

 what are lan settings

Or Search “Network and Sharing Center” in the start menu. And click “Change adapter settings” from left side menu.

Network Connections will open.

Right-click on Ethernet and go to properties. (Follow below image)

lan settings windows 7

1: Select “Internet Protocol Version 4 TCP/IPv4”

2: Use the following IP Address- (select this option for static IP mode)

3: IP Address: 192.168.1.10 (use the IP address of the same series you want to connect the network or Device IP address). For the internet contact the Internet provider for all IP details.

4: Click OK button to save settings

check the security settings for the wireless lan

If your internet router DHCP enabled then the select first option for DHCP configuration.

Obtain an IP Address automatically.

This is basic and simple steps to the setup network connection in Windows 7 to Windows 10.

LAN Static IP Address Configuration in Mac OS X

If you have Mac OS X then you can set up a Network IP address in static mode using simples steps. By default, Mac OS x also enabled in DHCP (Automatic mode).

Click on the Apple logo top left side corner as shown below image.

Choose System preferences from the menu.

Mac OS X lan settings

Go to Network option from System preference options.

Mac PC static ip configuration

Network Windows will open.

Location: Automatic ( you can edit and create a new location if you wish to configure in the different locations.

Configure IP4: Manually (for Static IP configuration manually mode will use)

IP Address: 66.116.108.44 ( use your internet IP series and other details to setup Lan TCP/IP in Mac PC.

local area network lan settings in Mac tab

If you want to make Network in DHCP mode then follow the steps.

Configure IPv4: Automatically (in this mode no IP settings needed. All detail will automatically assign to the PC.

Click the Apply button to save settings.

After making manual LAN IP address settings you can access the device and the internet after configuration is done. Manual IP configuration required when want to access any network device which supports TCP/IP4 protocol.

Источник

How to Access Your Wi-Fi Router's Settings

Here's how to sign into your router to change your home network's name, password, and other information.

Your router stores the settings for your home Wi-Fi network. If you want to change something on your network, you have to log into your router’s software, also known as firmware. From there, you can rename your network, modify the password, adjust the security level, create a guest network, and set up or alter a variety of other options. But how do you first get into your router to make those changes?

Читайте также:  Внешний вид сетевого адаптера Comfast CF WU715N

The process for logging into your router should be the same whether you use your internet provider’s router or you purchased your own router. It should also be the same whether you use a dedicated router or a combination modem/router supplied by your provider.

Find Your Router’s IP Address

You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1. But that’s not always the case, so you may first want to confirm the address of your router.

To find your router’s IP address, type cmd in the Windows search bar and press Enter to open the command prompt. Type ipconfig in the command prompt and press Enter to run the command. Scroll through the information until you see a setting for Default Gateway under Ethernet adapter or Wireless LAN adapter. That’s your router, and the number next to it is your router’s IP address. Close the window when done.

In Windows 10, you can also go to Settings > Network & Internet > Status > View hardware and connection properties. The next screen displays details for your different network connections. Scan the entry for Ethernet or Wi-Fi and look for the Default Gateway setting to find your router’s IP address. Once you have the correct IP address, type it into your browser’s address field and press Enter.

Username and Password

After you type the IP address, you’re asked for a username and password to access your router’s firmware. This is either the default username and password for your router, or a unique username and password that you may have created when you set up the router.

If you created your own username and password, login in with these credentials. However, if you don’t remember your login credentials or you never changed them from the unit’s default, signing in becomes a bit trickier. Some routers offer a password-recovery feature. If this is true of your router, this option should appear after you enter the wrong username and password a certain number of times. Typically, this window will ask for your router’s serial number, which you can find on the bottom or side of the router.

If you never changed the router’s login credentials, many use a default username of admin and a default password of password. Try that combination to see if it works. Otherwise your best bet is to run a web search for the default username and password of the brand of your router, such as Netgear, Linksys, Asus, or TP-Link.

Another option is check out the Router Passwords website, where you can select the manufacturer of your router to get a list of default usernames and passwords. Use each of the suggestions to try signing into your router.

If you still can’t log into your router’s firmware, you’ll need to reset the device to revert all settings back to their defaults. You’ll usually find a small reset button on your router. Use a pointed object, like a pen or paper clip, to push in and hold the reset button for around 10 seconds. You should now be able to log into your router using the default username and password.

Change Router Settings

After you gain access to your router’s firmware, you’ll be free to change whatever elements should be modified. These include the network name and password, the security level, and the Wi-Fi password. You can also set up parental controls, create a guest network, and manage attached devices. Just remember to apply any changes before you move on to the next screen.

Documentation and built-in help should be available to assist you with the different options if you’re not sure how to set them. Most current or recent routers also have setup wizards that can take care of some of this labor for you.

Change Router Login

As one example, you should change your router’s username and password from their default values. Doing so better secures your router so only you can access the firmware. With some routers, you can change both the username and password. With others, only the password can be changed, while the username is typically stuck as admin.

Источник



How To Fix WiFi Doesn’t Have A Valid IP Configuration Problem?

How To Fix ‘WiFi Doesn’t Have A Valid IP Configuration’ Problem On Windows 10?

In 1995, about only 1% of the world’s population was online. Twenty years later, and more than three billion people, nearly half of the planet, have an Internet connection. Being unable to connect to the Internet these days can be frustrating and make you feel like you are back in 1995. If you are using the Windows 10 operating system and receiving an «WiFi doesn’t have a valid IP configuration» error, then you know how it feels. This prevents use of WiFi and is a common problem experienced by Windows users. The problem concerning not having a valid IP configuration can occur even if you are using an Ethernet connection on your computer. The good news is that you can easily fix this problem.

The «WiFi doesn’t have a valid IP configuration» error message indicates that there is a problem with your computer TCP/IP stack — a set of network protocol layers that can work negatively together to result in an interruption to your Internet service. You might have received this error message when troubleshooting. Unfortunately, Windows Troubleshooting usually only finds problems, but does not provide solutions — you must solve the problem manually. The configuration problem can be caused by several issues such as a faulty network, incorrect network settings, hardware issues, network problems from your network operator, disabled Windows network services, and other reasons.

There are ways to fix this problem manually: you might need to release and renew your IP address, uninstall your wireless network adapter driver, reset TCP/IP, manually set your IP address, update your network adapter driver, or use other methods. In this article, we demonstrate some solutions step-by-step — you can try each until you find one that works for you. We will start with releasing and renewing your IP address, since this solution commonly works for users who have a network problem.

Читайте также:  How to Share a USB drive from Your Wi Fi Router

how to fix wifi doesn

Table of Contents:

It is recommended to run a free scan with Combo Cleaner — a tool to detect malware and fix computer errors. You will need to purchase the full version to remove infections and eliminate computer errors. Free trial available.

Release And Renew Your IP Address

This might be the easiest way to fix the «WiFi doesn’t have a valid IP configuration» problem by executing commands in Command Prompt. First, open Command Prompt by typing «command prompt» in Search and right-clicking on the «Command Prompt». Then, select «Run as administrator» to run it with administrator privileges.

release and renew your IP address step 1

In the Command Prompt window, type «ipconfig /release» and press Enter on your keyboard. Make sure that you put a space between «ipconfig» and «/release» in the command.

release and renew your IP address step 2

Now, do the same with the «ipconfig /renew» command. You must put a space after «ipcongif» in this command as well. Press Enter.

release and renew your IP address step 3

When you have finished entering the commands, type «exit», and press Enter to exit Command Prompt. Try restarting your computer to see if this helped to solve your problem.

Reset TCP/IP

This one is also simple: execute commands in Command Prompt. Open Command Prompt from Search again by right-clicking on it and run as administrator. In the Command Prompt window, type the «netsh winsock reset» command and press Enter on your keyboard.

reset tcp/ip step 1

Then, type the «netsh int ip reset» command and press Enter on your keyboard. Exit Command Prompt and restart your computer to see if it helped to solve the problem.

reset tcp/ip step 2

Uninstall Wireless Adapter Driver

You may receive the «WiFi doesn’t have a valid IP configuration» error due to a faulty network driver. You can try to uninstall the wireless adapter driver and then let the Windows 10 operating system reinstall it automatically the next time you start Windows. To uninstall your network adapter driver, go to Device Manager. Type «device manager» in Search and click the «Device Manager» result.

uninstall wireless adapter driver step 1

In the Device Manager window, find «Network adapters», expand it and right-click on your wireless device, Then, choose «Uninstall» from the drop-down menu.

uninstall wireless adapter driver step 2

You will be asked to confirm the uninstallation. Click «OK». Mark the «Delete the driver software for this device» checkbox if you see this option.

uninstall wireless adapter driver step 3

You will need to restart your PC for the changes to take effect. Restart your computer and see if it helped to solve this problem.

Set Your IP Address Manually

When you connect to Wi-Fi, you are usually given an IP address, and this process is performed by DHCP. The valid IP configuration issue means that something is wrong, and DHCP fails to receive a valid IP address. You can add a valid IP address manually to fix this problem — right-click on Start and select «Network Connections».

set your IP address manually

In the Network status window, click «Change adapter options» to view network adapters and change connection settings.

set your IP address manually step 2

You will see your network connection type. You should also see your wireless connection here (in our case, we see the Ethernet connection because we are using a wired connection). Right-click on your wireless connection and click «Properties» in the drop-down menu.

set your IP address manually step 3

Click «Internet Protocol Version 4 (TCP/IPv4)» to highlight it, and then click «Properties».

set your IP address manually step 4

You will see your Internet Protocol Version 4 (TCP/IPv4) Properties window. Here, mark «Use the following IP address:» and «Use the following DNS server addresses:», and then type the IP address, subnet mask and default gateway, preferred DNS server and Alternate DNS server. You can use our screenshot as an example.

Note: If your router LAN IP address is 192.168.1.1, you can set the IP address to 192.168.1.x (x is a number from 2 to 253), subnet mask to 255.255.255.0 and default gateway to 192.168.1.1.).

set your IP address manually step 5

Click «OK» and restart your computer to see if this solution helped to fix the problem.

Perform Clean Boot

You can also try to fix this problem by performing a clean boot of your Windows 10 operating system. A clean boot is performed to start Windows by using a minimal set of drivers and startup programs. This helps to eliminate software conflicts that occur when you install a program or an update, or when you run a program in Windows. This means you will have to disable all third-party applications and services to see if any of these applications is interrupting your wireless connection and preventing you from connecting to it. To perform a clean boot, type «system configuration» in Search and open the desktop app. Another way to access System Configuration is to type «run» in Search, open it, type «mschonfig», and the click OK to run it.

perform clean boot

When System Configuration is opened, select «Selective startup» so you can make changes and unmark «Load startup items».

perform clean boot step 2

Then, go to the «Services» tab and mark the «Hide all Microsoft services» checkbox. This will hide Microsoft apps and services (because we need to disable only third-party applications). In our case, only two services remain. Click «Disable all».

perform clean boot step 3

Then, go to the «Startup» tab and click «Open Task Manager» — this will allow you to manage startup items using Task Manager.

perform clean boot step 4

In opened Task Manager window, you will see a list of startup applications. Right-click each enabled application and disable it. You can also use the «Disable» button on the bottom-right corner.

perform clean boot step 5

When all startup applications are disabled, close Task Manager and click «Apply» and «OK» in the System Configuration window. Then, restart your computer for the changes to take effect. Check if this helped to solve the problem. If the problem is fixed, then it means that one of the programs is causing this error. You can try to enable them individually to see which is causing the problem, and then uninstall it.

Uninstall Your Antivirus Software

There are reports from users that antivirus software is associated with the «WiFi doesn’t have a valid IP configuration» error. If this is the case, then you will need to uninstall it from your Windows operating system. If your Internet connection works after the uninstall, you can reinstall your antivirus software (we recommend the latest version), or switch to different antivirus software. Uninstall your antivirus software and see if this helps.

Increase The Number Of DHCP Users

Some users report that you can fix this problem by increasing the number of DHCP users. Routers are usually limited to 50 DHCP users — this could be the reason why you are getting the «WiFi doesn’t have a valid IP configuration» error. To fix this problem, access your router and change the DHCP number of users manually. Some users also suggest that you increase the number of maximum wireless users (some routers are limited to only 10 wireless users). Check your router manual to see how to increase the number of DHCP users on your router. This might help to resolve the problem with your IP configuration.

Читайте также:  Wifi password app free download

Update Network Adapter Driver

This problem might be caused by an old or incorrect driver. In this case, you need to get an updated/new driver for your network adapter. There is an easy way to do this automatically with Snappy Driver Installer. You will need a computer with a working internet connection in order to download it.

Snappy Driver Installer (SDI) is a powerful free driver updater tool for Windows that can store its entire collection of drivers offline. Having offline drivers gives Snappy Driver Installer the ability to have access to fast driver updates, even if there is no active internet connection. Snappy Driver works with both 32-bit and 64-bit versions of Windows 10, Windows 8, Windows 7, Windows Vista, and Windows XP. Drivers are downloaded through Snappy Driver Installer in what are called driverpacks, which are just collections (packs) of drivers for various hardware like sound devices, video cards, network adapters etc. It can also show duplicate drivers and invalid drivers and it separates the updates that require you to restart your computer so it would be easier to distinguish them from the rest. You can download Snappy Driver Installer from here.

update drivers using snappy driver installer

After you have finished updating and installing drivers, restart Windows 10 for them to take effect and try to connect to the Internet to see if this works.

You can also update your driver manually, but you will need a computer with a working Internet connection. Go to your network adapter manufacturer website and download the latest driver and copy it to your USB drive. Go to Device Manager (type «device manager» in Search and open it). Expand the «Network adapters» section, select your network adapter, and right-click on it. Then, choose «Update Driver».

update your network-adapter driver step 2

You will be asked how you wish to search for drivers and provided two options: 1) search automatically for updated driver software; 2) browse your computer for driver software. The first option requires an Internet connection (if you have problems with your internet connection, choose the second option). Locate the driver on your USB drive and follow the instructions.

update your network-adapter driver step 3

When you have finished installing the new/updated driver, restart your computer for the changes to take effect and see if the network connectivity problem is fixed.

One of these solutions should solve your connectivity issue if you get the «WiFi doesn’t have a valid IP configuration» error — so you can get back online!

Video Showing How To Fix ‘WiFi Doesn’t Have A Valid IP Configuration’ Problem On Windows 10:

Источник

LAN IP Address Configuration in Windows and Mac PC

LAN IP Configuration in Windows and Mac PC

Network TCP/IP configuration settings need to set up an internet connection. When we want to connect a computer in the network than need to configure network settings. Does not matter you are using Windows, Mac or Linux PC, to run the internet and intranet required IP address configuration. You need a static IP address configuration to access the WiFI router and other network equipment.

Windows, Mac and Linux operating systems usually configured with DHCP mode(automatic) configuration so while the network configured in DHCP mode no need to set up an IP address in the PC.

However, you can configure LAN IP settings as per need static or DHCP depend on the network requirement. Follow the steps to change the IP address in windows 7, Windows 8, Windows 10, and Mac PC as well.

LAN Static IP configuration in Windows 7, 8.1 and Windows 10

Suppose you want to access router default gateway IP 192.168.l.l from windows PC then you have to manually configure the 192.168.1.0 network series to PC LAN settings or Use the DHCP option. follow the steps below.

To configure static IP mode in Windows 7, Windows 8, and Windows 10 all are similar steps.

TO making Static IP address configuration in Windows Pc you need to know about IP address class to configuration proper IP series.

You need to make PC LAN network in the same series IP address you want to connect any device.

Read more about IP Address Class

Making Windows LAN network in Automatic and Static IP follow the steps.

Open Run using Windows Key+ R key (press both together)

Type the command “Ncpa.cpl” and click the OK button.

 what are lan settings

Or Search “Network and Sharing Center” in the start menu. And click “Change adapter settings” from left side menu.

Network Connections will open.

Right-click on Ethernet and go to properties. (Follow below image)

lan settings windows 7

1: Select “Internet Protocol Version 4 TCP/IPv4”

2: Use the following IP Address- (select this option for static IP mode)

3: IP Address: 192.168.1.10 (use the IP address of the same series you want to connect the network or Device IP address). For the internet contact the Internet provider for all IP details.

4: Click OK button to save settings

check the security settings for the wireless lan

If your internet router DHCP enabled then the select first option for DHCP configuration.

Obtain an IP Address automatically.

This is basic and simple steps to the setup network connection in Windows 7 to Windows 10.

LAN Static IP Address Configuration in Mac OS X

If you have Mac OS X then you can set up a Network IP address in static mode using simples steps. By default, Mac OS x also enabled in DHCP (Automatic mode).

Click on the Apple logo top left side corner as shown below image.

Choose System preferences from the menu.

Mac OS X lan settings

Go to Network option from System preference options.

Mac PC static ip configuration

Network Windows will open.

Location: Automatic ( you can edit and create a new location if you wish to configure in the different locations.

Configure IP4: Manually (for Static IP configuration manually mode will use)

IP Address: 66.116.108.44 ( use your internet IP series and other details to setup Lan TCP/IP in Mac PC.

local area network lan settings in Mac tab

If you want to make Network in DHCP mode then follow the steps.

Configure IPv4: Automatically (in this mode no IP settings needed. All detail will automatically assign to the PC.

Click the Apply button to save settings.

After making manual LAN IP address settings you can access the device and the internet after configuration is done. Manual IP configuration required when want to access any network device which supports TCP/IP4 protocol.

Источник

Опубликовано в рубрике WiFi